Please take a look at the images above which include tune data as well as chromatograms on fragmentation data for tetradecane, pentadecane and hexadecane.
Complete with an HP 6890 Plus GC with split splitless back injector, Agilent G1513A 6890 autosampler tower, 18596CX tray and G1512A controller, and includes installation in the UK and a full 12 month on-site warranty. It is network ready, and includes an EI source (we can also supply an EI/CI instrument if both EI and CI is required).
*Please note that we also have a newer Agilent system, with the same specification available - please enquire below for full details.
1.6-800 amu in 0.1 amu steps; any subset of this range may be selected by the user.
Instrument provides scan rates up to 5,200 amu/second with 0.1 amu scan step size, with eight sampling rates. (Typical analyses require one scan/second, which is approximately 800 amu/second.)
Total ADC (analog/digital converter) dynamic range is 106. Linear calibration curves for individual compounds will vary depending on sample, target analyte, experimental conditions, and chromatographic performance.
SIM (single ion monitoring) capability
Filament emission current is user-selectable over the range 0-315 in all modes of operation. Some combinations of low ionization energy and high emission current are not allowed to avoid damage to the instrument.
Ion source temperature
Temperature of the independently heated ion source can
be controlled up to 250°C for EI.
Temperature of the independently heated quadrupole can be controlled up to 200°C.
Temperature of the interface (an auxiliary zone of the GC) can be controlled up to 350°C.
High Vacuum Pump Specification
255H Large Turbo Pump
Environmental conditions Temperature
Operating environment: 15 to 35°C at constant temperature (constant temperature:°C per hour)
Non-operating storage temperature: -20 to 70°C
Operating: 25% to 50% RH
Non-operating: 10% to 95% RH, (non-condensing)
- HP 5973 Network GC-MSD
- HP 6890+ GC
- Agilent G1513A Injector and Tray
- HP G1512A controller
- Independently heated electron-ionization (EI) source
- Independently heated hyperbolic quadrupole mass filter
- High-energy dynode (HED) electron multiplier detector
- Independently heated GC/MSD interface
- Control panel for local monitoring / operation
- Network ready
- PC, TFT & ChemStation E.01.01.335 featuring full control and data acquisition
- New Samsung Printer
- Edwards M1.5 Vacuum Pump
- 230V Operating voltage
- UK Installation (please enquire outside of mainland UK)
- 12 month on-site warranty